efel
New Member
Posts: 4
|
Post by efel on Jul 17, 2020 8:57:41 GMT -5
Hi, When launching LibertyBasic, an editor windows opens. I know how to get a full screen window by selecting so in the "set up" menu. But I don't want to get a full screen window, but get a window at a given location on the screen. I can't manage doing that! I use Windows. Thanks for answering such a novice basic question!
efel
|
|
|
|
Post by Carl Gundel on Jul 17, 2020 9:15:06 GMT -5
Hi, When launching LibertyBasic, an editor windows opens. I know how to get a full screen window by selecting so in the "set up" menu. But I don't want to get a full screen window, but get a window at a given location on the screen. I can't manage doing that! I use Windows. Thanks for answering such a novice basic question!
efel
You should be able to size and position the Liberty BASIC editor and then close it. When you start it back up it should remember where it was and what its size was and reopen at that size and position. |
|
efel
New Member
Posts: 4
|
Post by efel on Jul 17, 2020 9:44:30 GMT -5
Thanks for that quick answer.
That method works well for all softwares such as Word,Excel,LTSpice...But not with Liberty Basic. Neither with windows 7 , nor Windows 10!
|
|
|
|
Post by Carl Gundel on Jul 17, 2020 9:50:55 GMT -5
Thanks for that quick answer. That method works well for all softwares such as Word,Excel,LTSpice...But not with Liberty Basic. Neither with windows 7 , nor Windows 10! It works here for me on Windows 10 and Liberty BASIC v4.5.1. I tested it to be sure before I posted my original reply. |
|
efel
New Member
Posts: 4
|
Post by efel on Jul 17, 2020 10:31:03 GMT -5
My version is v4.03.
I've just downloaded the v4.5.1 and it works.
Can I use that new version with my v4.03 licence or do I have to buy an update?
|
|
|
|
Post by Rod on Jul 17, 2020 10:37:19 GMT -5
If it shows your name in [brackets] at top left of the IDE you are good to go. Usually Liberty remembers your registration. If that has been erased try Setup, Enter Registration Code. Enter the original registration code you were sent by Carl.
V5 will be a paid update
|
|
|
|
Post by Carl Gundel on Jul 17, 2020 10:39:48 GMT -5
My version is v4.03. I've just downloaded the v4.5.1 and it works. Can I use that new version with my v4.03 licence or do I have to buy an update? Your v4.03 registration will work fine with v4.5.1. |
|
efel
New Member
Posts: 4
|
Post by efel on Jul 17, 2020 10:42:34 GMT -5
Quite good! Thanks for your answers!
|
|
