|
Post by Craig7 on Sept 11, 2020 8:24:17 GMT -5
Are there any examples of desktop programs created in Liberty Basic?
|
|
|
Post by Brandon Parker on Sept 11, 2020 11:23:37 GMT -5
What type? Here is a screenshot of my pool controller HMI that I have been working on. What you see is written in Liberty BASIC with a little help from my Import Architect precompiler, and it communicates with the pool controller which is based on an Arduino MEGA 2560 with a Yun Shield for interfacing via WiFi. And yes, the shark and duck move around the pool. The controller buttons work as well, and the selector switch mimics the actual selector switch position on the controller. All data is updated every second. There's so much more that I will be doing with this one... {:0) Brandon Parker
|
|
|
Post by Brandon Parker on Sept 11, 2020 11:27:47 GMT -5
Here is an image of a simulation program I wrote at my previous job to show the effects of contacts dropping out during the operation of a DC Load Leveler. {:0) Brandon Parker
|
|
|
Post by Brandon Parker on Sept 11, 2020 11:33:48 GMT -5
There is a myriad of other programs that I could post images of, but I am sure you get the idea. There are also tons of examples that others could share as well.
You can pretty much design & program almost anything you want.
Should you need help with something going forward feel free to reach out on the forum. We are more than happy to discuss and help!
{:0)
Brandon Parker
|
|
|
Post by tsh73 on Sept 11, 2020 15:34:55 GMT -5
Brandon, could you tell how you did tubes on a picture for pool controller?
|
|
|
Post by tsh73 on Sept 11, 2020 15:41:40 GMT -5
|
|
|
Post by Brandon Parker on Sept 11, 2020 19:53:58 GMT -5
Brandon, could you tell how you did tubes on a picture for pool controller? Anatoly, I just used paint. I found a free image that looked decent and started hacking it up to make the pieces and parts that I needed. Then I just turned the entire image into a sprite so that I can have different background colors if I want. {:0) Brandon Parker
|
|
|
Post by mknarr on Sept 12, 2020 9:15:04 GMT -5
Boy I wrote one of those many years ago in Radio Shack Color Basic and now I'm ashamed of it. I also wrote one to do the racing calculations. I also have one in LB for Pigeon and Poultry Shows and when you select a breed a picture of that breed pops up. I have 176 pictures of pigeon breeds alone in the data base.
|
|
|
Post by honkytonk on Sept 13, 2020 6:42:41 GMT -5
|
|
|
Post by Craig7 on Sept 18, 2020 17:49:49 GMT -5
What type? Here is a screenshot of my pool controller HMI that I have been working on. What you see is written in Liberty BASIC with a little help from my Import Architect precompiler, and it communicates with the pool controller which is based on an Arduino MEGA 2560 with a Yun Shield for interfacing via WiFi. And yes, the shark and duck move around the pool. The controller buttons work as well, and the selector switch mimics the actual selector switch position on the controller. All data is updated every second. There's so much more that I will be doing with this one... {:0) Brandon Parker Looks good. So graphics are no issue with Liberty BASIC then.
|
|
|
Post by Craig7 on Sept 18, 2020 18:00:41 GMT -5
There is a myriad of other programs that I could post images of, but I am sure you get the idea. There are also tons of examples that others could share as well. You can pretty much design & program almost anything you want. Should you need help with something going forward feel free to reach out on the forum. We are more than happy to discuss and help! {:0) Brandon Parker Thanks will take a closer look at Liberty Basic then.
|
|