xtal
Junior Member
Posts: 61
|
Post by xtal on Mar 30, 2018 17:16:25 GMT -5
|
|
|
|
Post by Carl Gundel on Mar 30, 2018 18:06:46 GMT -5
Hi,
Is this a LB v4.5.1 specific post?
-Carl
|
|
|
|
Post by Admin on Mar 31, 2018 5:15:18 GMT -5
Rod moved this post to hardware interfacing board. Its a Liberty BASIC G-Code sender for CNC / Plastic Extrusion etc
More meat on the bones from the author would help folks understanding.
|
|
xtal
Junior Member
Posts: 61
|
Post by xtal on Apr 3, 2018 19:04:47 GMT -5
There is a Q_A.txt [Questions and Answers] file to help with usage.
This a a G-Code Sender that sends supported G-Code to an Arduino Uno Engine with a CNC Shield approx $30 or less
The Arduino Shield is running GRBL 1.1f code from git-hub. The Sender was written to run on 1.1f
I've tried to have a button for all basic commands.....This has been quite a learning exercise.
LB 4.5.1 was used so a couple of new instructions was used...
Its still a work in progress, I have done small 7 PC boards with my homebuilt CNC machine,
and 2 of the PCB's were made for my cnc...
|
|
