hal9k
Junior Member
Posts: 87
|
Post by hal9k on May 13, 2023 13:25:46 GMT -5
Probably not an LB issue, but I'm hoping somebody knows how to do this. My program produces a report in a text window. The report is very wide so I need to print it in landscape mode. To make this easier, I defined a printer called Landscape Laser with landscape as it's default orientation. That appears to work. However, at a point size that is legible, the lines are still slightly too long. The ideal fix would be to use a left and right margin that are less than the default values. I can't find out how to do this. Any ideas would be appreciated.
Thanks, as always!
|
|
|
Post by Rod on May 13, 2023 14:09:00 GMT -5
You have much more control printing from a graphics window rather than a text window. Printform.bas ships as an example.
Play with printform.bas then come back and ask again if you are puzzled.
|
|
|
Post by Rod on May 13, 2023 14:41:01 GMT -5
|
|
hal9k
Junior Member
Posts: 87
|
Post by hal9k on May 13, 2023 16:07:17 GMT -5
Thanks, I'll check it out.
|
|